Lubricare Maintenance system

Quick, simple and economic - this perfectly sums up the Lubricare maintenance device, when used with Bien-Air's Spraynet and Lubrifluid products, with each spray specifically designed for a phase in the maintenance cycle: Spraynet, for dissolving impurities and cleaning the instrument both inside and out, and Lubrifluid, for effective lubrication of instruments. Lubricare and Bien-Air maintenance sprays support the daily use of your instruments, guaranteeing impeccable maintenance, optimal operation and an extended service life.

This set up comes with everything you need to just connect to an air source and you are go to go!!

TECHNICAL DATA

	Lubricare Maintenance system
Capacity	Up to 4 instruments per cleaning cycle
Length of the cleaning cycle	25 seconds per cleaning cycle, per instrument. Choice of 2 cleaning/lubrication modes: Normal mode and intensive mode
Type of instrument	Turbines, contra-angles and handpieces
Maintenance	Cleaning and lubrication
Consumption	5 times more economical than manual maintenance, Lubricare allows 400 maintenance cycles with 1 bottle of Spraynet and 1 bottle of Lubrifluid
Extraction system	An extraction system removes the oil vapours. A collector absorbs the excess lubricant, to ensure a cleaner working area and improved hygiene.
Lubricant detector	A lubricant detector monitors the status of the system and detects low lubricant levels
Connection	Compatible with Type E coupling as per ISO 3964 and 4- or 5-way turbine coupling
Voltage	AC 100-240 V 50/60 Hz
Air pressure	0.3~0.5 MPa
Recommended air pressure	0.35 MPa
Air flow rate	40~60 Nl/min
Weight	Approx. 10 kg
Dimensions (including the collector)	Width 300 x height 370 x depth 300 mm
Spraynet ref.	SPRAYNET 1600036-006 Cleaning spray.500 ml bottle. Box of 6
Lubrifluid ref.	LUBRIFLUID 1600064-006 Lubricating spray. 500 ml bottle. Box of 6
Reference	Lubricare Maintenance system 1600915-001

Maintenance Procedures

• Bien Air's Manufacturer/Importer warranty of 2 Years as applicable for this product.
• Service and Warranty are handled by Bien Air, the manufacturer/importer directly for this product
• Pacific Dental Repair will not be liable to replace the Products and the liability to replace any such Product is that of the OEM Manufacturer/Importer
• Pacific Dental Repair and the Purchaser acknowledge that the Products purchased/used are a subject matter of original OEM Manufacturer/Importer’s warranties only and NOT of Pacific Dental Repair
• Any or all claims in relation to returns, replacement, or warranties shall be made to the concerned OEM Manufacturer/Importer only. However, Pacific Dental Repair may assist the customer in registering a request to get the Product replaced, returned, or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered norhas the item been used in anyway as the case may be.